The 10 Most Common Sales Objections, With Scripts That Work
Most objections are questions in disguise, and the same ten come up on almost every call. Here is one method that works for all of them, then a script and a follow-up question for each, so you stop improvising under pressure.
By NORDON Team
9 min read
An objection is not the end of a deal. It is the buyer telling you what stands between them and a yes. The problem is that most reps answer the words instead of the reason behind them. "Send me some information" gets an email with a PDF, and the deal dies quietly. The fix is a short, repeatable method and a prepared line for each objection you hear every week.
The method: acknowledge, clarify, respond, confirm
- Acknowledge. Show you heard it, without agreeing or arguing. "That's fair" or "I hear that a lot at this stage" lowers the temperature. Do not say "I understand, but": the "but" erases everything before it.
- Clarify. Ask one question to find out what the objection really means. "Too expensive" can mean five different things. You cannot answer it well until you know which one you have.
- Respond. Answer the real concern, briefly. One or two sentences, ideally tied to something the buyer told you earlier in the call.
- Confirm. Check that the answer landed. "Does that address it, or is there something else behind it?" If there is something else, you have just found the real objection.
Many objections can be prevented. If you asked about budget, decision process and timing during discovery, half of the list below never comes up. The discovery call questions guide covers how to ask those early without sounding like a form.
The 10 objections, with scripts
For each one: what it usually means, a script you can say, and a follow-up question to keep the conversation going. Adapt the wording to your voice. A script you cannot say naturally is worse than none.
1. "We don't have the budget"
What it usually means: either there truly is no money this period, or the problem is not painful enough to find money for. Your job is to find out which.
That's fair, and I'd rather know now than later. Can I ask: is it that nothing was planned for this, or that it's hard to justify against other priorities right now?
Follow-up: "If the cost of the problem we talked about were clearly higher than the price, is there a budget it would come from, or would it wait until next year?"
2. "It's too expensive"
What it usually means: the value is not clear yet, or they are comparing you to something cheaper, or they are negotiating. Each needs a different answer, so diagnose before you respond. This one has its own guide: handling "it's too expensive", with an ROI example and rules for discounts.
Too expensive compared with what: another option you're looking at, or what you expected this to cost?
3. "Just send me some information"
What it usually means: a polite way to end the call. Sometimes it is real interest from someone who prefers to read. Do not refuse, but make the email specific so it gets read.
Happy to. So I send you something useful and not a generic brochure: what would you want it to answer? Is it more the price, how it works, or how it fits with what you use today?
Follow-up: "Once you've read it, would it make sense to spend 15 minutes on Thursday going through your questions?" Agreeing on a time turns a brush-off into a next step.
4. "We already use X"
What it usually means: switching feels risky and expensive. They are not saying X is perfect. Never criticize X; the buyer chose it and will defend it.
Makes sense, X is a solid choice and a lot of our customers came from it. Out of curiosity, if you could change one thing about how it works for you today, what would it be?
Follow-up: "How much time or money does that cost you in a typical month?" If the answer is "not much", respect it and leave the door open. If it is real, you have a reason to continue.
5. "It's not the right time"
What it usually means: another project has priority, or nothing forces a decision now. Find out what "the right time" looks like.
Understood. What would need to happen for this to be the right time: is it the end of a project, a new budget, or something else?
Follow-up: "If we wait until then, what happens to the problem in the meantime?" Ask it with curiosity, not as a trap. If the answer is "nothing much", agree on a date to talk again and put it in the calendar now.
6. "I need to talk to my boss"
What it usually means: you are not talking to the decision maker, or your contact does not feel able to sell it internally. Help them, do not go around them.
Of course. When you bring it to them, what do you think their first question will be? I'd like to make sure you have a clear answer, or we could do a short call together if that's easier for you.
Follow-up: "Besides your manager, who else usually weighs in on a decision like this?" Multi-person buying is the norm in B2B. The closing techniques guide covers how to keep several stakeholders moving.
7. "I'm not interested"
What it usually means: on a cold call, a reflex. Later in a deal, a real no. On a cold call, ask one question; if it is still no, end politely.
Fair enough, and I won't push. Can I ask one thing before I go: is it that this isn't a problem for you, or that it's not a priority right now?
Follow-up: if they say it is not a problem, thank them and leave. If they say not a priority, ask when it might be. The cold call openers guide has more lines for the first brush-off.
8. "We built it in-house"
What it usually means: pride, sunk cost, or a real fit. Internal tools often work fine at first and get expensive to maintain later. Respect the work and ask about the upkeep.
That's impressive, most teams don't have the people to do that. How much of your team's time goes into keeping it running, versus building new things?
Follow-up: "Is there anything it doesn't do that you've had on the wish list for a while?" The gap between the tool and the wish list is your opening.
9. "We don't want to be locked into a contract"
What it usually means: fear of paying for something that does not work out. Lower the risk, not the price.
That's a reasonable worry. What would make it feel safe: a shorter first term, a pilot with clear success criteria, or a way out if it doesn't deliver what we agreed?
Follow-up: "If we agreed on what success looks like in the first 60 days, and it was met, would a longer term be fine then?" Only offer terms your company actually allows.
10. "I need to think about it"
What it usually means: there is a concern they have not said out loud. Sometimes it is genuine: they really do need time. Either way, find out what they will be thinking about.
- Buyer
- This looks good. I just need to think about it.
- You
- Of course, it's a real decision. So I can help: what's the part you most want to think through? Is it the cost, the timing, or whether it'll actually fit how your team works?
- Buyer
- Honestly, it's whether my team will use it. The last tool we bought sat there.
- You
- That's a fair concern. What if we did a two-week pilot with three of your people and looked at usage together at the end?
Follow-up: "When would be a good time to talk again, so it doesn't drift?" Put a date on it before you hang up.
A quick reference table
| Objection | Often means | Clarifying question |
|---|---|---|
| No budget | No money, or not enough pain | Nothing planned, or hard to justify? |
| Too expensive | Value unclear, comparison, or negotiating | Compared with what? |
| Send information | Polite exit | What should it answer? |
| We use X | Switching feels risky | What would you change about X? |
| Not the right time | Other priorities | What would make it the right time? |
| Talk to my boss | Not the decision maker | What will their first question be? |
| Not interested | Reflex on cold calls | Not a problem, or not a priority? |
| Built in-house | Sunk cost or real fit | How much time goes into upkeep? |
| Contract lock-in | Fear of a bad bet | What would make it feel safe? |
| Think about it | An unspoken concern | What part do you want to think through? |
Common mistakes
- Arguing. Winning the point loses the deal. You are on the same side of the table as the problem.
- Answering too long. A two-minute reply to a five-word objection sounds defensive. Keep the response to a few sentences, then confirm.
- Discounting first. Dropping the price before you know the objection teaches the buyer that pushing works.
- Treating every objection as a stall. Some are real. A clear "no" with a reason is useful; log it and move on.
- Not writing them down. The objections you hear are market research. Note the buyer's exact words so the team can improve the pitch. See sales call notes and follow-up for a template.
How to practice and prepare
Write your own version of each script, read it aloud, and role-play with a colleague who throws objections at random. Record which ones still make you hesitate and rewrite those. If you are preparing for a sales job interview, interviewers often ask you to handle an objection on the spot; the sales representative interview questions page has examples.
On live calls, NORDON can hold your preparation for you. In the workspace you can build a playbook with watched topics such as "price" or "contract", each with your own note, and the note appears the moment the buyer mentions the topic. If you upload your pricing documents, its answers about terms and prices come from those documents with the source shown, not from guesswork.
Try it in NORDON
Your objection notes, on screen when the topic comes up
Put your objection notes in a NORDON playbook as watched topics. When the buyer mentions one, your note appears at once, and answers about prices and terms cite your own documents.
Questions
What is the best way to handle a sales objection?
Acknowledge it, ask one question to clarify what it really means, respond briefly to the real concern, and confirm the answer landed. The clarifying question matters most, because the same words can hide different problems.
Should I ever accept an objection and walk away?
Yes. If the buyer has no problem you solve, or the timing is truly wrong, thank them, agree on whether to talk again, and move on. Pushing past a real no damages trust and wastes both your time.
How do I stop the same objections from coming up?
Raise them yourself during discovery. Ask about budget, who decides, and timing early in the call. An objection you bring up first is a discussion; one the buyer raises at the end is a hurdle.
Is it OK to read objection scripts on a call?
Use them as a starting point, not a recital. Practice until the words sound like you, and keep short notes in front of you rather than full paragraphs.